ViewSonic VS12197-2G manual Installation, Insert Remote Control Batteries

Installation

1. Insert Remote Control Batteries

1 Remove the battery cover by pulling then lifting the knob on the cover.

2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover.

CAUTION

•Only use the specified AA batteries.

•Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury.

•Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to personal injury.

•Dispose of the battery in accordance with local laws and regulations.

•Keep the battery away from children and pets.

•When the remote control will not to be used for an extended period, remove the batteries.

2.Connecting RF antenna or Cable TV Wire

Make sure the power is OFF before installing your LCD TV. Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV chan- nels into memory with Auto Scan function when using an antenna or cable TV system without a cable connecter box (See page 18).

ENGLISH

RF Cable or Adapter

(not supplied)

ViewSonic 10 NX1932W