ViewSonic VT2430
13
ENGLISH
Basic Operation
To operate your LCD TV, you may use the TV remote control or buttons located at bottom of
the LCD TV to select input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug.
Power On/Off
To turn the LCD TV on/off :
Press the POWER button at the bottom of the LCD TV or press 电源 (POWER) button on your
remote control to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.
Note: when there is no signal in the PC mode, the power LED indicator lights amber after a
few seconds’ idleness.
Select input source
Press the 信号源 (INPUT) button on the remote control ,then press ▼ or ▲ to select the required
input source between TV, AV, S-Video, YPbPr, HDMI and PC. To conrm the input source,
press 确认 (ENTER) button.
Volume Adjusting
Press 音量+/- (VOL +/-) to adjust volume.
To silence volume, press 静音 (MUTE).
If you want to restore volume, press 静音 (MUTE) again, or press 音量+/- (VOL +/-) directly.
Channel Select
Press number keys, or 频道▲/▼ (CH ▲▼) buttons to select the desired channels.
Ex: the desired channel is 8, press 8 only.
Ex: the desired channel is 80, Press 8, then press 0.
Return to previous channel, press 回复 (RETURN) key.
Sleep Time Setting
Repeatedly press 休眠 (SLEEP) button to set the off timer. The function is used to automatically
shut off the LCD TV after a preset period of time passed.
There are several times for choice -- 15min., 30min., 45min., and 60min..
INFO
To display the current information of the LCD TV, press 显示 (INFO), and the current state will
be displayed on the screen.
Switch Sound Mode
Repeatedly press MPX button on remote control to Switch the sound mode in NICAM-Stereo
or NICAM-Dual. (only available for Hong Kong area)
Using OSD Menu
You are able to use OSD menus to adjust various settings by using your remote control or
menu buttons on the front panel of the LCD TV.
The basic operation is as following:
t Press 菜单 (MENU) to display OSD menu.
t Press ▲▼ to cycle through the menus.
t Press ◄► to enter the menu you select.
t Use ▲▼ to appoint your desired optional item.
t Press ◄► to adjust the settings.
t Press 菜单 (MENU) to nish adjustment and press 菜单 (MENU) again to exit the OSD menu.