ViewSonic VT2430
9
ENGLISH

2. Connecting RF antenna or Cable TV Wire

Installation
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.

1. Insert Remote Control Batteries

Make sure the power is OFF before installing your LCD TV. Connect the LCD TV
to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV channels
into memory with Auto Scan function when using an antenna or cable TV system
without a cable connecter box (See page 15).
Only use the specied AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of re or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries
incorrectly may result in cracking or leakage, which may pose a risk of re or
lead to personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove
the batteries.
•
•
•
•
•
•

CAUTION

RF Cable or Adapter