ViewSonic VT2430
4
ENGLISH
Getting Started
Congratulations on your purchase of a ViewSonicTM LCD TV.
Important! Save the original box and all packing material for future shipping needs.

Mounting ViewSonic LCD TV to the wall

The LCD TV can be used in a free standing position or wall-mounted. Before installing the
product to the wall, please consider the following guidelines:
• Due to safety concerns, if the VESA mounting kit is purchased separately please make
sure the mounting kit is UL-Listed, and replaceable only by service personnel.
• Read the Important Safety Instructions, at the start of this manual.
Do not install in a moist or wet environment. This equipment is intended for indoor use.
Do not install near heat source, or strong magnetic elds.
Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LCD TV is already set up for free-standing operation, you need to rst remove the
stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
Disconnect the power and any other cables that might hinder moving the LCD TV.
• Set the LCD TV on a table or work surface, placing the screen face down on a towel or
woolen blanket to protect the screen surface from damage while installing plate.
Please refer the following steps to remove the stand.
1. Lay the TV at on a table with the LCD screen face down. To prevent the TV from being
scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Press on four corners of the hinge cover and pull as arrow direction to disengage the
hinge cover.
3. Remove the 4 screws on the hinge, then pull up the stand slowly.
4. Then, you shall successfully uninstall the stand.

Package Contents

Your LCD TV package includes:
* Note: For Hong Kong area, there is no warranty card.
LCD TV
Power Cord
Remote Control with batteries
VGA Cable
• ViewSonic User Guide
Warranty Card *