ViewSonic VS12617 Timing of replacing the lamp, Replacing the lamp, ViewSonic, PJD2121, Status

Timing of replacing the lamp

When the lamp’s total working time accumulates to over 2000 hours, the On-Screen Display (OSD) will deliver a message recommending that you replace the lamp. Please contact a service center to replace the lamp as soon as possible

The following lamp warning displays will remind you to change the lamp.

Status Message

The lamp has been in operation for 2000 hours. Install a new lamp for optimal performance. You may continue to operate the projector.

Replacing the lamp

Type number : RLC-052

To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces. Before replacing the lamp, clean the lamp compartment and dispose of cleaning materials. Be careful of sharp edges in the lamp compartment. Wash hands after lamp replacement.

Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire.

Turn the power off and disconnect the projector from the wall socket before replace the lamp. Follow with below

instruction.. Contact your dealer for details.

Resetting the lamp timer

1.Press MENU to open the On-Screen Display (OSD) menu

2.Go to the Advance menu and press Enter.

3.Press to select Lamp Reset and press Enter.

19

ViewSonic PJD2121