Viking 325E, 200, 450E manual Dimensions & Cutout Dimensions

Dimensions & Cutout Dimensions

Professional Series

Specifications

2	3-
	7/8”
(60.6 c
	m)

26-3/8”

(67.0 cm)

23-3/4”

(60.3 cm)

26-3/8”

(67.0 cm)

23-1/8”

(59.0 cm)

2-5/8”

(6.7 cm)

3-3/16”

(8.1 cm)

	Built-In Dishwasher
Description	200/325E/450E Models
Overall width	23-7/8” (60.6 cm)
Overall height from floor	33-7/8” (86.0 cm) min. to 35” (89.0 cm) max.
Overall depth from rear–Professional	To edge of side - 24” (61.0 cm) - includes door panel
	With door open - 49” (124.5 cm)
Overall depth from rear–Designer	To edge of side - 24” (61.0 cm) - includes door panel
	With door open - 49” (124.5 cm)

			-	3/4			”
2	8							)
			.0		c	m
		3										”
(7										4	9			)
													cm
							(1		2	4	.5

24”	)	24”
(61.0 cm
		(61.0 c
		m)

3
3-
		7/
			8
(			”
8
	6.
		0	c
			m)

Cabinet FlushPanel Flush

	Designer Series
26-3/8”	26-3/8”
(67.0 cm)	(67.0 cm)
23-3/4”	23-1/8”
(60.3 cm)	(59.0 cm)
	2-1/4”
	(5.7 cm)

2-7/8”

(7.3 cm)

Cutout width		24” (61.0 cm)
Cutout height	34” (86.4 cm) min. to 35” (89.0 cm) max.
Cutout depth		24” (61.0 cm)
Electrical requirements	200 Model:	325E/450E Models:
	15.0 amps, 120VAC/60 Hz;	15.0 amps, 120VAC/60 Hz;
	Power cord must be	3’9” (1.1 m) electrical cord 3 prong plug supplied
	purchased separately.	with unit.
Water-heating element rating	200/325E/450E models - 1200 watts
Inlet water temperature	200 Model:	325E/450E Models:
	120°F (49°C) required	120°F (49°C) recommended;
		Dishwasher will perform properly with cold water
		Note: Cycle times will vary
Inlet water pressure operating range	10 to 125 psi (.69 to 8.62 bar)
Inlet water hose	5’ (1.5 m) braided stainless steel water line with 3/8” (0.95 cm) compression
	fitting connected to dishwasher
Drain hose	7’ (2.13 m) 1/2” (1.3 cm) ID “crimp-proof” flexible drain hose attached to
	dishwasher, connections provided for 5/8” (1.6 cm), 3/4” (1.9 cm) or
	1” (2.5 cm), cut as required
Drain hose high loop required	Height from floor - 20” (51.0 cm) min.
Approximateshippingweight	200 model - 147 lbs.	325E model - 152 lbs.	450E model - 157 lbs.
	(66.7 kg)	(68.9 kg)	(71.2 kg)

3
4” mi
(8	n.
6.4	c
3	m)
5” ma
(8	x.
9.0	c
	m)

Note: A 2”

(5.1 cm) cut-out is required for water supply and discharge lines.

Cabinet Flush Panel Flush

Custom Panel (200/450E Models)

	23-3/4”		23-1/8”
(60.3 cm)		(59.0 cm)

Cabinet Flush Panel Flush

6 7