Installation Procedure (cont’d.)

Installation Procedure (cont’d.)

 

5b

Front Panel Attached

7

7b

Front Panel Removed

Attach screws through trim pieces into cabinets.

Attach screws through bracket into cabinets

(select models).

(select models).

Remove front panel to access the front leveling legs.

5c

6

Leveling legs will be raised during shipping. Adjust

To check level, front to back, pull the top rack half-way

front leveling legs down by using a 1/4 drive ratchet.

out of unit. The rack should remain stationary and not

When the adjustment nut is visible, complete the

move in or out. After unit is level, replace front panel

lowering of the legs from the top. When the legs are

and ensure overflow channel is in place.

down, tighten the locking nut on the top of the leg.

 

To level center rear leg, see Step 5a.

 

8

9

 

1.0”

 

(2.5 cm)

Minimum

 

20”

 

(50.8 cm)

Cut here for 5/8”

from floor

 

(1.6 cm)

 

Cut here for 3/4”

 

(1.9 cm)

Install High Loop Clip, which is provided, a

Identify discharge connection size; cut line to

minimum of 20” (50.8 cm) from the floor.

correct size and connect. Clamp if necessary.

10A

10B

(Discharge with food waste disposer)

(Standard discharge)

18

19

Page 10
Image 10
Viking 325E, 200, 450E manual Installation Procedure cont’d, Front Panel Removed

200, 325E, 450E specifications

The Viking 200, 450E, and 325E are models of rugged all-terrain vehicles celebrated for their exceptional performance and versatility in challenging environments. Designed with advanced engineering and robust components, these vehicles are ideal for forestry, agriculture, and recreation.

Starting with the Viking 200, this model excels in its balance of power and efficiency. It is equipped with a reliable four-stroke engine that offers smooth acceleration and impressive torque. The overall design emphasizes stability, featuring a low center of gravity that ensures safe maneuverability on uneven terrain. With a spacious cargo bed and a payload capacity, the Viking 200 is perfect for hauling tools, equipment, or supplies.

The Viking 450E takes versatility to a new level with its enhanced features and technologies. This model boasts an upgraded engine that not only increases horsepower but also improves fuel efficiency. Its advanced four-wheel drive system allows for seamless transitions between different types of terrain, ensuring that users can traverse mud, snow, and rocky paths with ease. The Viking 450E also features adjustable suspension systems that enhance comfort, making long drives less taxing on the operator.

On the other hand, the Viking 325E stands out due to its compact design without sacrificing performance. It is particularly appreciated in environments where space is limited, allowing it to navigate tight trails and narrow pathways effortlessly. Despite its smaller size, the Viking 325E is equipped with a high-capacity engine and durable chassis that can withstand heavy use. The model incorporates cutting-edge technologies such as electronic fuel injection for improved responsiveness and low emissions.

Each of these Viking models is designed with user comfort in mind, featuring ergonomic seating and intuitive controls that cater to operators of various experience levels. High-visibility dashboards and integrated lighting systems ensure that users can operate these vehicles safely, even in low light conditions.

Overall, the Viking 200, 450E, and 325E showcase the brand’s commitment to quality and innovation in the all-terrain vehicle market. With their impressive features, robust performance, and cutting-edge technologies, these models continue to be a preferred choice for a wide range of applications, making them indispensable tools for outdoor enthusiasts and professionals alike.