GE C2S980 Instructions Safety, Operating, Install the Anti-TipDevice, Installation of the range

Instructions

Installation of the range.

Instructions Safety

Install the Anti-Tip Device

An Anti-Tip bracket is supplied with instructions for installation in a variety of locations. The instructions include

all necessary information to complete the installation. Read the Safety Instructions and the instructions that fit your situation before beginning installation.

Bracket	Wall
	plate

Screw must enter wood

WARNING:

■Range must be secured by Anti-Tip bracket supplied.

■See instructions to install (supplied with bracket).

■Unless properly installed, the range could be tipped by stepping or sitting on the door. Injury might result from spilled hot liquids or from the range itself.

Operating

Installation Instructions

Consumer Support Troubleshooting Tips

Typical installation of anti-tip bracket attachment to wall.

When All Hookups Are Completed:

MAKE SURE ALL CONTROLS ARE LEFT IN THE	MAKE SURE THE FLOW OF COMBUSTION
OFF POSITION.	AND VENTILATION AIR TO THE RANGE IS
	UNOBSTRUCTED.

Converting to LP Gas (or converting back to natural gas from LP)

This range leaves the factory set for use with natural	The conversion instructions and LP orifices can
gas. If you want to convert to LP gas, the conversion	be found attached to the range next to the
must be performed by a qualified LP gas installer.	pressure regulator.
	Keep these instructions and the orifices in case
	you want to convert back to natural gas.

52