Operating Instructions Safety Instructions
Using the upper oven controls.
(Throughout this manual, features and appearance may vary from your model.)
Features and appearance may vary.
Oven Control, Clock, Timer and Features
BAKE Pad | DELAY START Pad | |
Touch to select the bake function. | Use along with COOKING TIME or SELF | |
BROIL HI/LO Pad | CLEAN pads to set the oven to start and | |
stop automatically at a time you set. | ||
Touch to select the broil function. | ||
|
Installation | Instructions |
Consumer Support Troubleshooting Tips
Touch to select baking with the convection function.
CONVECTION ROAST PadTouch to select roasting with the convection function.
START PadMust be touched to start any cooking or cleaning function.
DisplayShows the time of day, oven temperature, whether the oven is in the bake, broil or
Touch to select
Using the
If “F– and a number or letter” flash in the display and the oven control signals, this indicates a function error code. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.
If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.
The time of day will flash in the display when there has been a power outage.
OVEN LIGHT PadTouch to turn the oven light on or off.
12
Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.
CLEAR/OFF PadTouch to cancel ALL upper oven operations except the clock, timer and Gas/Control Lockout.
CLOCK PadTouch before setting the clock.
Number PadsUse to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and
Touch to select the timer feature.
PROBE PadTouch when using the probe to cook food.
GAS/CONTROL LOCKOUT PadTouch and hold the GAS/CONTROL LOCKOUT pad for 3 seconds to lock/unlock the surface burners, oven burners and control panel so they cannot be activated.