Care and cleaning of the range. | ge.com |
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the
Safety Instructions
Front right burner
Burner cap
Burner head
Electrode
Burner base
Make sure the hole in the burner
head is positioned over the electrode
and that the burner head is fully inserted inside the burner base.
A small gap between the base and
head is normal.
Front left burner, back right burner
and back left burner
Burner cap
Burner head |
|
Stability | Use a |
chamber | sewing |
| needle or |
| |
| unclog the |
| small hole |
Burner base Electrode | in the |
| burner |
| head. |
Make sure the slot in the burner
head is positioned over
the electrode.
Sealed Burner Assemblies
Turn all controls OFF before removing the burner parts.
The round side burner caps and burner heads can be lifted off, making them easy to clean. The electrodes are not removable.
The oval center burner head and cap assembly can be lifted off, making it easy to clean. The burner electrode is not removable.
Center griddle
Burner
head and
cap
assembly Electrode
CAUTION: Do not operate the cooktop without all burner parts and grates in place.
Electrode | Burner head |
|
| Electrode | |
Front left, back | Burner | |
base | ||
right and back left | ||
Front right burner | ||
burner |
The electrode of the spark igniter is exposed when the burner head is removed. When one burner is turned to LITE, all the burners spark. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over hot cookware.
Operating Instructions
Instructions | Installation |
Troubleshooting Tips Consumer Support
31