Viking 450 manual Features Cycles, Options, Wash Cycles

Features: Cycles Features: Cycles

Product Controls

450

Wash Cycles

Pots/Pans

Heavily soiled pots, pans and casserole dishes. Long heated prewash loosens up encrusted food. High temperature and intense pressure long main wash. High temperature rinse.

Normal Wash

Normally soiled plates, glasses, bowls, and lightly soiled pots and pans. Normal prewash, main wash and rinse. Medium pressure and temperature.

Econo Wash

Normally soiled plates, glasses, bowls, and lightly soiled pots and pans. Lower temperature main wash and rinse. Longer prewash and main wash to maximize cleaning performance while using less energy.

Light/China

Lightly soiled dishes or fine china and crystal. Low temperature wash and rinse. Lightest pressure to protect dishes.

Rinse/Hold

All dishware. Short, medium pressure rinse with no heat.

Cycles Options

Options

Top Wash Only

Washes dishes on top rack only. Conserves energy. Available on Normal Cycle.

Econo Dry

Selects a “no heat” dry. Available on Normal, Econo Wash and Light China Cycles.

155° F (68° C) Final Rinse

Increases the temperature of final rinse to 155° F (68° C). Available on Pots and Pans and Normal Cycle.

Delay Start

Lets you delay running the dishwasher for up to 10 hours. To set “Delay Start”, select the desired wash cycle and option(s). Press the “Delay Start” button once and the number “2” will light, indicating a two hour delay. If you desire a longer delay, continue pressing the “Delay Start” button to a 4, 6, 8 or 10 hour delay. The corresponding number on the button will light. Once you have set the desired delay time, press the “START” button and close the door. “Delay Start” is not available with the Rinse/Hold cycle.

Audible Sound Signal (select models)

A single beep will occur when you select cycles, options and press the “START” key. The end-of-cycle signal consists of 2 long beeps. If the “START” button is not pressed or if the door is not closed within 4 seconds of pressing the “START” button, 3 short beeps will occur. For all other error messages and to deselect the audible sound signal, see the Troubleshooting/Fault Codes section.

Product Controls

12 13