Viking 450 manual Maintenance, Coarse Strainer, To Clean Filters

Maintenance

Maintenance

Your new dishwasher is designed to give you years of dependable service. In order to maintain a high level of performance, you need to make sure your dishwasher is properly cared for and cleaned. Here are a few things you can do to make sure your dishwasher performs at its highest level.

1

Coarse strainer (lift to remove)

Coarse strainer

1

2

Primary Filter

(Do not remove primary filter)

Fine filter

(Squeeze tabs to remove coarse strainer)

3

4

3

Fine filter

(lift to remove)

Product Care

Filters

The filters are important, because they continuously filter wash water. Under normal operation, the filters are self cleaning and require no maintenance. If there is a heavy amount of food soil, sediment or hard water conditions, it may be necessary to clean the filters after each use. To clean, remove the filters as shown in the above illustration and soak overnight in a 50/50 solution of water and vinegar. Citric cleaner and water are also acceptable. Filters should appear bright when clean.

The Coarse Strainer

Large food particles that can’t pass through the drainage pump are collected in the coarse strainer. Lift out and empty the coarse strainer when necessary. Don’t forget to put it back again. It is normal for a small amount of water to remain in the coarse strainer area.

WARNING

Never operate the dishwasher without the filters in place.

28

(Rotate to remove fine filter)

To Clean Filters

Remove the coarse strainer and empty. If necessary, remove the fine filter and clean all surfaces. DO NOT remove primary filter. Replace the filters and secure in place.

Product Care

29