Viking 855 service manual Maintenance, Suggested Repair Tools

Models: 855

1 16
Download 16 pages 56.79 Kb
Page 4
Image 4

BEARING

 

CANISTER

 

CANISTER

TEMPERATURE

CARRIER

 

 

O-RING

 

PROBE HOLE

 

 

 

ASSEMBLY

 

 

 

 

 

CASING

(Optional)

 

 

 

 

 

BUSHING

SHAFT

 

 

 

 

 

 

OUTER

MAGNET

ASSEMBLY

BRACKET

INNER MAGNET

ASSEMBLY

FIGURE 4

Cutaway View Mag Drive Pump, MD2-b with Bearing carrier Illustrated

RELIEF VALVE (shown with optional

RV coverplate)

ROTOR

HEAD

GASKET

SEAL

HEAD

Gauge

Port Boss

IDLER PIN

IDLER

CASING

MAINTENANCE

Series 855 pumps are designed for long, trouble-free service life under a wide variety of application conditions with a minimum of maintenance. The points listed below will help provide long service life.

CLEANING PUMP:

Keep the pump as clean as possible. This will facilitate inspection, adjustment and repair work.

LUBRICATION:

Some bearing carriers require external lubrication. This must be applied slowly with a handgun to lubrication fittings every 500 hours of operation with multi-purpose grease, NLGI # 2. Do not over-grease. Applications involving very high or low temperatures will require other types of lubrication. Refer to ESB-515. Consult factory with specific lubrication questions.

STORAGE:

If the pump and coupling are to be stored, drain the pump and pour non-detergent SAE 30-weight oil into the pump port. Apply grease to the pump or the coupling shaft extension, if present or accessible.

Viking suggests rotating the pump shaft every 30 days to circulate the oil in the pump. The coupling should be stored in a dry area.

Note: If the liquid to be pumped reacts with oil, use an acceptable alternate.

SUGGESTED REPAIR TOOLS:

The following tools are required to properly repair Series 855 pumps. These tools are in addition to standard mechanics’ tools such as open-end wrenches, pliers, screwdrivers, etc. Most of the items can be obtained from an industrial supply house.

1.Soft face hammer

2.Metric Allen wrenches (for set screws)

3.Torque Wrench with a locknut socket

4.External snap ring pliers - (Viking Part # 2-810-029-375)

5.Internal snap ring pliers - (Viking Part # 2- 810-047-999)

6.Arbor press

7.Brass bar

8.Hook style spanner wrench

SECTION TSM 685.2 ISSUE C

PAGE OF 16

 

 

Page 4
Image 4
Viking 855 service manual Maintenance, Suggested Repair Tools

855 specifications

The Viking 855 is a remarkable addition to the family of high-performance, versatile amphibious vehicles designed for a variety of terrains and demanding environments. Known for its robustness and reliability, the Viking 855 combines advanced engineering with practical functionality, making it an ideal choice for both commercial and recreational applications.

One of the defining features of the Viking 855 is its powerful engine, which provides impressive torque and acceleration. This vehicle is typically equipped with a diesel engine that emphasizes fuel efficiency without sacrificing performance. The engine's design contributes to a lower environmental impact, making the Viking 855 suitable for operations in sensitive areas.

The Viking 855 stands out with its distinctive all-terrain capabilities, allowing it to navigate through mud, snow, sand, and water with ease. Its amphibious nature is enhanced by a well-engineered hull, which not only helps it float but also allows for smooth transitions from land to water and vice versa. This makes the Viking 855 an excellent choice for search and rescue operations, construction sites, and recreational outings where access to challenging terrains is a requirement.

One of the key technologies implemented in the Viking 855 is its hydraulic system, which powers its steering and braking mechanisms. This system ensures precise control and responsiveness, even in difficult conditions. The Viking 855 also features a high ground clearance, advanced suspension, and robust tires, further enhancing its off-road capabilities.

Safety is a crucial feature of the Viking 855, with attention paid to stability and passenger protection. The vehicle typically includes multiple seat belts and reinforced cabins, ensuring that occupants remain secure even in tumultuous environments. Additionally, the Viking 855 is designed to meet industry standards for durability and safety.

The Viking 855 boasts a spacious and modular interior, which can be configured for various uses, from transporting personnel to carrying cargo. This flexibility extends to its load-carrying capabilities, making it a useful vehicle for logistical operations.

In summary, the Viking 855 is an exceptional vehicle that fuses power, efficiency, and adaptability. Its advanced features and capabilities make it a top-tier choice for those needing reliable transport across diverse landscapes, ensuring it remains an attractive option for commercial users and adventure seekers alike.