Table of Contents

IMPORTANT– Please Read and Follow

Warnings & Important Safety Information _______________________________________________3

Dimensions _________________________________________________________________________5

Specifications _______________________________________________________________________6

Cutout Dimensions __________________________________________________________________7

Flush Mount Installation ______________________________________________________________8

Electrical Requirements _____________________________________________________________10

General Information ________________________________________________________________11

Installation _________________________________________________________________________12

Final Preparation ___________________________________________________________________15

Performance Checklist ______________________________________________________________16

Service & Registration_______________________________________________________________18

Before beginning installation, read these instructions thoroughly and carefully.

DO NOT remove permanently affixed labels, warnings or plates from the product as this may void the warranty.

Observe all local and national codes, requirements and ordinances.

Installation must conform with local codes or in the absence of codes, the National Electrical Code, ANSI/NFPA-70 –latest edition, or Canadian Electrical Code, CSA C22.1-1982 and C22.2 No. 01982 –latest edition, National Fuel Gas Code ANSIZ223.1/NFPA-54 –latest edition and all local codes and ordinances.

IN MASSACHUSETTS: This appliance must be installed by a Massachusetts licensed plumber or electrician.

IN CANADA: Installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes.

Installers should leave these instructions with the consumer who should retain them for the local inspector’s use and for future reference.

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. ALWAYS read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.

All safety messages will be preceded by the safety alert symbol and the word “DANGER,” “WARNING” or “CAUTION.” These words mean:

DANGER

Hazards or unsafe practices

which WILL result in severe personal

injury or death

WARNING

Hazards or unsafe practices

which COULD result in severe personal

injury or death

CAUTION

Hazards or unsafe practices which COULD result in minor personal injury

All safetyor propertymessagesdamagewill identify. the

hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Site Preparation: It is recommended that a thorough site inspection be conducted PRIOR to unpacking and moving this appliance.

Note: Wiring diagram is located on top of oven or in control panel.

3

Page 2
Image 2
Viking F20670D manual Table of Contents