Troubleshooting/Fault Codes

FLASH

FAULT

 

ACTION

Pots/Pans

Normal Wash

 

 

 

 

 

 

 

 

1

1

Pan Flood Sensor Disconnect

Reset Unit and try again. If problem persists, contact service.

1

2

Motor Control Status Error

Reset Unit and try again. If problem persists, contact service.

1

3

Motor Control Comms Error

Reset Unit and try again. If problem persists, contact service.

1

4

Diverter Timeout

Reset Unit and try again. If problem persists, contact service.

1

5

Drain Error

1.

Turn water on at sink and run garbage disposal to verify that sink is not clogged.

 

 

 

2.

Verify that dishwasher drain hose is not clogged or kinked.

 

 

 

3.

If draining into disposal, verify that plug has been removed from disposal.

 

 

 

4.

Verify that drain hose has high loop, per installation guide.

 

 

 

5.

Verify that dishwasher is level front to back and side to side.

 

 

 

6.

Verify filters are not clogged.

 

 

 

Reset Unit and try again. If problem persists, contact service.

2

1

Huba Disconnect Error

Reset Unit and try again. If problem persists, contact service.

2

2

Fill Timeout

1.

Verify water supply to dishwasher is turned on.

 

 

 

2.

Verify that fill line is not kinked.

 

 

 

3.

Verify that dishwasher is level front to back and side to side.

 

 

 

4.

Turn water on at sink and verify there has not been a decrease in water pressure.

 

 

 

Reset Unit and try again. If problem persists, contact service.

 

 

 

 

 

2

3

Low Level Sensor Error

1.

Verify that no dishes have turned over and are holding a significant amount of water.

 

 

 

2.

Verify that drain hose has high loop, per installation guide.

 

 

 

Reset Unit and try again. If problem persists, contact service.

2

4

High Level Error

1.

Verify items in rack are properly retained so that they can not turn over.

 

 

 

Reset Unit and try again. If problem persists, contact service.

 

 

 

 

 

2

5

Level Sensor Error

1.

Verify that dishwasher is level front to back and side to side.

 

 

 

2.

Verify that drain hose has high loop, per installation guide.

 

 

 

Reset Unit and try again. If problem persists, contact service.

3

1

UI-MC Comm Error

Reset Unit and try again. If problem persists, contact service.

 

 

 

 

3

3

Drain Pump Error

Reset Unit and try again. If problem persists, contact service.

3

4

Motor Status

Reset Unit and try again. If problem persists, contact service.

 

 

 

 

3

5

Motor Under Voltage

Reset Unit and try again. If problem persists, contact service.

4

1

Temperature Sensor Error

Reset Unit and try again. If problem persists, contact service.

 

 

 

 

5

5

Internal Error

Reset Unit and try again. If problem persists, contact service.

See Note A

Pan Flood

Reset Unit and try again. If problem persists, contact service.

Product Care

Note A - Both lights flash continuously.

Note B - To reset unit, press and hold the START button 4 seconds.

Note C - Numbers listed indicate the times the lights will flash when a specific error is detected (example: For a drain error, the POTS/PANS light will flash once and the NORMAL WASH light will flash 5 times).

Note D - Cycle and Option keys will only illuminate after they are selected. To activate dishwasher, press START, the light will illuminate, close the door within 4 seconds and cycle will start.

Turning Audible Sound On and Off:

To turn off, press Rinse/Hold button for 10 seconds. The beep stops and the Rinse/Hold LED will flash 2 times. To turn on, repeat above instructions. The audible sound beeps 2 times and the Rinse/Hold LED flashes 2 times to identify that it is on.

Note: The audible sound cannot be disabled for error messages.

Note: The LED will flash in sync with the audible sound.

Product Care

36

37

Page 19
Image 19
Viking VDB325ESS, VDB450E manual Troubleshooting/Fault Codes, Flash Fault Action

VDB325ESS, VDB325E, VDB450E specifications

The Viking VDB450E, VDB325ESS, and VDB325E are innovative models in the realm of outdoor power equipment, specifically designed for efficient and effective leaf vacuuming and debris collection. These units offer users a range of features and technologies that enhance performance, convenience, and usability.

The Viking VDB450E is a powerful leaf blower and vacuum combination unit that stands out for its robust 45cc engine, delivering impressive airflow and suction capabilities. It is equipped with a durable fan design that maximizes airspeed, making it ideal for tackling heavy-duty debris. The VDB450E features an adjustable speed control, allowing users to customize the flow of air based on the task at hand. Its lightweight, ergonomic design facilitates easy maneuverability, reducing operator fatigue during extended use. Additionally, the quick-release bag system simplifies the process of emptying collected debris, enhancing overall efficiency.

On the other hand, the Viking VDB325ESS is designed with extensive user comfort in mind. It comes with a 32cc engine that strikes a balance between power and fuel efficiency. The model features a soft-grip handle that minimizes vibration and enhances comfort, making it suitable for prolonged usage in diverse outdoor environments. This unit integrates a unique shredding system that reduces the volume of collected debris, allowing users to optimize their workflow and minimize disposal frequency. The VDB325ESS also includes a variable speed throttle, enabling precise control for different jobs, whether it's blowing leaves or vacuuming them up.

The Viking VDB325E is the more compact alternative, providing a blend of functionality and ease of use. With its 32cc engine, it is designed for homeowners and gardeners who require reliable performance without the need for commercial-grade equipment. The VDB325E features an easy-to-start system, ensuring a hassle-free user experience right out of the box. Its lightweight construction makes it easily portable, and the straightforward controls enable users to quickly adapt to the machine.

All three models share common characteristics such as efficient fuel consumption, reduced emissions, and easy maintenance. They are built with high-quality materials designed to withstand the rigors of outdoor work. Whether you are a professional landscaper or a homeowner tackling seasonal yard clean-up, the Viking VDB series promises reliability and performance, making them standout additions to any outdoor toolkit.