Viking VDB325ESS, VDB450E manual Features Cycles, Wash Cycles, Options

Features: Cycles Features: Cycles

Product Controls

450E

325E

Wash Cycles	HI TEMP WASH
POTS/PANS	Increases time, temperatures and may add extra water to improve
	cleaning performance. Available with Pots/Pans and Normal cycles.
Heavily soiled pots, pans and casserole dishes. Intense pressure, added	NOTE: When used with Pots/Pans cycle, periods of soaking will occur to aid in
wash time and high temperatures.	the removal of baked on soils.

Product Controls

NORMAL WASH

Normally soiled plates, glasses, bowls, and lightly soiled pots and pans. Varying pressure levels. Energy usage label is based on this cycle.

ECONO WASH

Normally soiled plates, glasses, bowls, and lightly soiled pots and pans. Lowers last wash temperature and increases cycle time for optimum performance.

LIGHT/CHINA

Lightly soiled dishes or fine china and crystal. Low temperature, shorter wash and rinse. Varying pressure levels to ensure wash performance and protect delicate dishes.

RINSE/HOLD

All dishware. Short, non-heated rinse with high pressure.

Options

TOP WASH (450E model only)

Washes dishes on top rack only. Available on Normal Cycle.

ECONO DRY (450E model only)

Selects a “no heat” dry. Available on Normal, Econo Wash and Light China Cycles.

DELAY START

Lets you delay running the dishwasher. To set “Delay Start”, select the desired wash cycle and option(s). Press the “Delay Start” key once and the number “2” will light, indicating a two hour delay. If you desire a longer delay, continue pressing the “Delay Start” key to the desired delay time. The corresponding number on the key will light. Once you have set the desired delay time, press the “START” button and close the door. “Delay Start” is not available with the Rinse/Hold cycle. Available delay times vary by models.

Audible Sound Signal

A single beep will occur when you select cycles, options and press the “START” button. The end-of-cycle signal consists of 2 long beeps. If the “START” button is not pressed or if the door is not closed within 4 seconds of pressing the “START” button, 3 short beeps will occur. For all other error messages and to deselect the audible sound signal, see the Troubleshooting/Fault Codes section.

NOTE: Option, Cycle and Start keys will only illuminate after they are selected.

12 13