Viking VEWDO536SS Drawer Indicator Light, Optional Accessories for Moist or Dry Heat, Proofing

Models: VEWDO536SS VEWDO536

1 12
Download 12 pages 48.84 Kb
Page 7
Image 7
Drawer Indicator Light

Operation

Drawer Indicator Light

The drawer indicator light is located on the front panel of the drawer. The drawer indicator light will glow red when the drawer element is heated. The light will cycle on and off as the temperature is maintained.

Optional Accessories for Moist or Dry Heat

Pans/Lids - This warming drawer is designed to accommodate standard size pan inserts. The optional pan/lid set consists of:

1)one 4” D. x 12” L. x 10½” W. pan/lid

2)two 4” D. x 12” L. x 7” W. pans/lids

3)two 2½” D. x 12” L. x 7” W. pans/lids

Operation

Operation

Temperature Control Settings

The knob is used to select the temperature of the drawer and is located on the right side of the control panel. The “1” setting represents low, “2” represents medium, and “3” represents high. The majority of foods are held at a medium setting to maintain a serving temperature. However, your own preference may be for hotter foods.

To keep several types of food hot for serving, key the temperature setting for the meat. For example, to hold rare roast beef, select a lower setting, cover the other foods that otherwise would be kept at a higher setting.

Repeated opening of the drawer allows the hot air to escape and the food to cool. The drawer should not be opened unless adding or removing food.

Proofing

Yeast dough can be proofed in the warming drawer. Place the dough in a bowl. Place the bowl on the low rack in the drawer. Fill the moisture cup half full with water and place in the opening in the rear center of the low rack. Turn the temperature control to the lowest setting to facilitate the fermentation time. A towel should be placed over the dough to minimize surface drying. The dough should remain in the warming drawer until it has doubled in size and a slight depression remains when the surface is touched gently with a finger.

Warming Plates

To warm serving bowls and plates, place temperature control on a low setting. Place the empty dishes on the low rack to raise them off the bottom of the drawer. If you want hotter dishes or want to heat fine china, please check with the manufacturer of the dishes for their maximum heat tolerance.

Operation

12

13

Page 7
Image 7
Viking VEWDO536SS manual Drawer Indicator Light, Optional Accessories for Moist or Dry Heat, Temperature Control Settings