Viking DFFB536 Wire Shelf Adjustment, Wire Basket Adjustment all freezer model only, Operation

Models: DFFB536 DFFB536R VISB542DSS VCSB542 VCBB536LSS DFFB530L

1 24
Download 24 pages 20.97 Kb
Page 13
Image 13
Wire Shelf Adjustment

Freezer (all units except bottom-mount)

Wire Shelf Adjustment

You can easily adjust your freezer's shelves. To remove a shelf, simply tilt it up at the front, releasing the hooks from the shelf support. Then, pull the shelf straight out. To replace, guide the rear hooks of the shelf into the slots in the shelf supports. Then, tilt the shelf up at the front until the hooks drop into the slots. Next, lower the front of the shelf to a level position.

Wire Basket Adjustment (all freezer model only)

Automatic Ice Maker (all units except all refrigerator)

The ice maker and slide-out ice drawer on your refrigerator are not adjustable, but the ice drawer slides forward for easy access to ice.

After the refrigerator reaches normal temperature, the ice maker fills with water and begins operating. Under normal conditions, the ice maker will produce seven to nine batches of ice per 24 hour period.

NOTE: Allow 24 to 48 hours after installation before looking for ice in your ice drawer. You should discard the first three full drawers of ice produced by your refrigerator, and should also throw out the first drawer full of ice your refrigerator produces after extended periods of non-use.

You can easily adjust your freezer's wire baskets by moving the dividers. To remove a divider, simply grasp it in the center, and pull the divider straight up. To replace, guide the divider around the basket wires in the desired location, then push the divider down until it stops.

Operation

Freezer Basket Divider

 

 

(bottom-mount model only)

 

The freezer basket divider separates

 

the freezer into sections for easy food

 

organization.

During ice production, the ice maker arm raises and lowers. When the ice bin is full, the ice maker arm automatically turns the ice maker off. To manually stop ice production, raise the ice maker arm. You will hear a definite click when you have the arm in the right position. The ice maker won't produce any more ice until you push the ice bin all the way back into place.

Wire Basket Adjustment (all freezer model only) CAUTION

Toavoid damageto ice maker,observethe following:

Do not forceice maker arm down or up past stop position.

Do not place or storeanythingin ice bucket.

On

Position

Ice

Maker

Arm

Off

Position

Operation

Freezer Basket DividerWARNING

If the freezer basket divider is removed, there is enough space for children to crawl inside. To prevent accidental child entrapment, DO NOT allow children to play inside drawer.

Ice Bin Adjustment (all freezer model only)

Ice bins can be adjusted to match the way you use your freezer. The ice bin on the left-hand side is used for collecting ice from the ice maker. Once the left-hand ice bin is full, the bins can be reversed so additional ice is made. If the ice maker is not operating, the ice bin can be used for cold storage.

24

25

Page 13
Image 13
Viking DFFB536 Wire Shelf Adjustment, Wire Basket Adjustment all freezer model only, Freezer Basket Divider, Operation