Viking VRBD/VUBD 24" W Proper Disposal of Your Old Refrigeration Product, Built-In Installation

Models: VRBD/VUBD 24" W

1 16
Download 16 pages 43.36 Kb
Page 2
Image 2
Proper Disposal of Your Old Refrigeration Product

Proper Disposal of Your Old Refrigeration Product

Suffocation Hazard Remove doors from your old refrigerator.

Failure to do so can result in child entrapment, which can cause death or brain damage

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous, even if they will sit for “just a few days.” If you are getting rid of your refrigeration product, please follow the instructions below to help prevent accidents.

BEFORE YOU THROW AWAY YOUR OLD REFRIGERATION

PRODUCT:

•Take off the doors.

•Leave the shelves in place so that children may not easily climb inside.

BUILT-IN INSTALLATION

Select Location

The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight and away from heat sources. Units with fan cooled condensers can be built-in.

Unit should be operated in a properly ventilated area with ambient temperatures above 40oF (4.4oC) and below 110oF (43oC). Installation should be such that the cabinet can be moved for servicing if necessary.

Cabinet Clearance

Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any obstructions. The adjacent cabinets and countertop can be built around the unit as long as no top trim or counter top is installed lower than the top of the hinge.

ELECTRICAL CONNECTION

Electrical Requirements

 

 

 

 

 

 

 

 

Grounding type wall

Power Supply

 

A 115 volt, 60 Hz, AC only 15 amp fused electrical supply is required. (A

 

 

receptacle

 

with 3-prong

 

 

 

time delay fuse or circuit breaker is recommended.) It is recommended

 

 

 

 

grounding plug

 

 

 

 

 

 

 

 

that a separate circuit, serving only this appliance, be provided.

 

 

 

 

 

 

 

 

 

 

•ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.

 

 

 

 

 

•DO NOT UNDER ANY CIRCUMSTANCES REMOVE THE POWER

 

 

 

 

 

SUPPLY CORD GROUND PLUG.

 

 

 

 

 

•DO NOT USE AN EXTENSION CORD.

 

 

 

 

 

Recommended Grounding Methods

 

 

 

 

 

For your personal safety, this unit must be grounded. This appliance is equipped with a

 

 

 

 

power supply cord having a 3-prong grounding plug. To minimize possible shock hazard,

 

 

 

 

the cord must be plugged into a mating 3-prong grounding type wall receptacle

 

 

 

 

grounded in accordance with the National Electrical Code and local codes and ordinances.

 

Electrical Shock Hazard

If the circuit does not have a grounding type receptacle, it is the responsibility and

Do not splash or spray water

obligation of the customer to exchange the existing receptacle in accordance with the

from a hose on a refrigerated

National Electrical Code and applicable local codes and ordinances. The third ground

unit. Doing so may cause an

plug SHOULD NOT, under any circumstances, be cut or removed. All UL listed

electrical shock which may

refrigerated products are equipped with this type of plug.

 

result in severe injury or death.

 

 

 

 

 

 

2

Page 2
Image 2
Viking VRBD/VUBD 24" W Proper Disposal of Your Old Refrigeration Product, Built-In Installation, Electrical Connection