LAYOUT AND LOADING RECOMMENDATIONS
Each shelf can be used as a storage, presentation or sliding shelf. Each of your wine cabinet’s shelves has 13 recesses for bottles thus enabling you to place your bottles in total safety. Also, your shelves all have a label slot, designed to receive the
Shelf in storage version configuration:
To place bottles on a storage shelf:
-Install the shelf in the selected location.
-Place a wooden locking pin in each of the two holes located on the right and left of the upper face approximately 15 cm in front of the shelf: these pins butt up against the heat shaped wall and avoid all accidental shelf movement (See diagram).
-Start by placing the bottles in the rear recesses with the base of the bottle towards the back.
-Continue by placing the bottles in the front recesses, facing them in the opposite direction.
-Continue stacking the bottles in this way making sure that no bottle touches the rear wall.
-A storage shelf can hold a maximum of 6 layers, each of 13 bottles, this representing 78 "Standard" Bordeaux bottles (100kg).
Shelf in presentation version configuration:
To place bottles on a presentation shelf:
-Install the shelf in the selected location.
-Place a wooden locking pin in each of the two holes located on the right and left of the upper face approximately 15cm in front of the shelf: these pins butt up against the heat shaped wall and avoid all accidental shelf movement (See diagram).
-Start by placing the bottles in the rear recesses with the base of the bottles towards the back (6 "Standard" Bordeaux bottles).
-Continue stacking the bottles on the rear recesses (7+6+7+6 = 26 "Standard" Bordeaux bottles) making sure that no bottle touches the rear wall.
-To present the bottles, place them in an upright position on the front of the shelf (Maximum capacity: 6 "Traditional" Bordeaux bottles).
7 | W W W . V I N O T E M P . C O M |
