Vinotemp VinoCellier Cord Instructions, Installation Instructions, Aligning Your Wine Cellar

CORD INSTRUCTIONS

For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected grounding-type outlet as shown in figure A. Not for use with an extension cord.

INSTALLATION INSTRUCTIONS

1.Carefully remove all of the packaging around your wine cabinet.

2.Place your wine cellar on a solid, flat surface that is strong enough to support the unit when fully loaded.

3.Allow a minimum 4-inch space between the wall and the back of the cabinet.

4.Open the door and make sure all components are intact.

5.Release the cord and plug the power cord into a standard electrical outlet.

Aligning Your Wine Cellar

In order for you to level off your cabinet as easily as possible, it is equipped with 4 adjustable feet. However, we recommend that you tighten the back feet to the maximum and use the front feet to create a level.

Important Placement Notes

♦Select an unencumbered, well-ventilated area for best performance.

♦This wine cellar is designed to be free standing only and operated indoors.

♦Do not place the unit in a moist location or near a heat source including other major appliances or direct sunlight.

♦Do not plug unit into the same outlet as a refrigerator or microwave.

♦Do not place heavy objects on top of the unit.

Important: WAIT 48 HOURS BEFORE PLUGGING IN THE CABINET Should you need to move your cabinet, never tilt it more than 45° and always sideways, on the side that the electrical cable comes out (right hand side when looking at the cabinet.)

1 7 6 3 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1	6
i n f o @ v i n o t e m p . c o m