OPERATING INSTRUCTIONS
oPlug the power cord into a standard electrical outlet. o Gently place/slide the racks in the cooler.
o Determine the best temperature setting to use. o Place bottles inside the cooler.
o Limit the frequency of opening the door to conserve energy and maintain proper storage temperature.
Important: When using the cooler for the first time, allow at least 24 hours for the internal temperature to adjust properly. Make sure there are at least 3 to 5 bottles in the unit.
TEMPERATURE CONTROL
Important note: In order to operate efficiently, unit should be in an environment with an ambient temperature of less than 90°F (32°C).
Temperature Presets:
For your convenience, the cooler is programmed at storing temperature. The temperature zone for the right side
Setting the temperature control (manually):
You can manually adjust the temperature. Simply press the 
button on
the control panel to decrease the temperature and the 
button to increase the temperature inside the cooler in 1° increments. The temperature zone for the right side ranges from 48oF to 65oF (9oC
18oC). The variance between compartments can be no more than 18oF (10 oC).
When the cabinet temperature is too low the LED will display “LL”. When the temperature is too high it will display “HH”. The “ER” display shows when there has been a power disruption.
Both sides of this unit can store wine or beverages, but the left side can be set colder than the right side.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1 | 9 |
i n f o @ v i n o t e m p . c o m |
