Vinotemp VT-38 Cord Instructions, Cooler Installation, W W W . V I N O T E M P . C O M

CORD INSTRUCTIONS

For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3- prong grounding-type plug, and should be used in combination with a properly connected grounding-type outlet as shown in figure A.

It is not recommended to use this cooler with an extension cord or power board. Please ensure that the appliance is plugged directly into the electrical outlet.

COOLER INSTALLATION

1.This cooler is designed to be built-in (fully recessed) or free standing.

2.Remove all exterior and interior packaging.

3.Place your cooler on a flat surface that is strong enough to support the unit when fully loaded.

4.Do not place the unit in a moist place or display in direct sunlight.

5.Do not place heavy objects on top of the unit.

6.Do not place the unit next to a major appliance that emits large amounts of heat, such as a dishwasher, microwave, oven, etc.

7.Unit is not designed for installation in a garage or basement.

8.Before connecting the appliance to the power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system due to handing during transportation.

9.Clean the interior surface with lukewarm water using a soft cloth before first use. Be sure to wipe dry.

10.Do not plug unit into the same outlet as a refrigerator or microwave.

W W W . V I N O T E M P . C O M