Vinotemp VT-50SBW instruction manual Temperature Control, Setting the temperature control manually

TEMPERATURE CONTROL

Important note: In order to operate efficiently, thermoelectric products should be in an environment with an ambient temperature of less than 90°F (32°C).

Setting the temperature control (presets):

For your convenience, The Wine cellar is programmed at storing temperature. The temperature pre-set by the manufacturer is 54oF (12oC). The indicator shows the temperature of 54oF (12oC).To change the preset temperature in the wine cellar, simply press the Preset button until the desired number appears. The following sections about storing and serving wines will advise the optimal temperature for your wine.

Setting the temperature control (manually);

You can manually adjust the temperature. Simply press the (-) button on the control panel to decrease the temperature and the (+) button to increase the temperature inside the wine cellar. The temperature range is from 45°F (7°C) to 65°F (18°C).

The electronic control and digital display provide an attractive method to control temperature. The upper zone will be approximately 8-9 °F (4.4-5oC) warmer and the lower zone will be approximately 8-9°F (4.4-5oC) cooler than the middle section. The fluctuation of temperature display is normal, fluctuation range is about -5 oF~5°F (-2.8oC~2.8oC).

1 7 6 2 1 S o u t h S u s a n n a R o a d ,

R a n c h o D o m i n g u e z ,	C a l i f o r n i a 9 0 2 2 1	8
i n f o @ v i n o t e m p . c o m	- F a x 3 1 0 . 8 8 6 . 3 3 1 0

800 . 777 . 8466