Illumination On/Off
Within five seconds of entering Programming Mode, press 
. The remote will beep once for on, twice for off and the light will turn on/off with each press.
Page Mode On/Off
After entering Programming Mode, press 
within five seconds to toggle on and off. When the Page Mode is on, the remote control will wake up periodically to check for messages from the security module. It will also wake up when any button is pushed. When Page Mode is off, the remote control “sleeps” until a button is pushed, extending the life of the battery.
To Exit Programming Mode
To exit Programming Mode, take no action for five seconds. The remote control will generate two beeps to indicate programming mode has been exited.
Using Your System
Warning! Safety First
The following safety warnings must be observed at all times:
■Due to the complexity of this system, installation of this product must only be performed by an authorized Directed Electronics dealer.
© 2006 Directed | 15 |
