USER MANUAL
ENGLISH
USE
WARNING!
On some points of the machine there are some adhesive plates indicating:
– DANGER
–WARNING
–CAUTION
–CONSULTATION
While reading this Manual, the operator must pay careful attention to the symbols shown on the plates. Do not cover these plates for any reason and immediately replace them if damaged.
BATTERY INSTALLATION
WARNING!
The electric components of the machine can be seriously damaged if the batteries are either improperly
installed or connected. The batteries must be install by qualified personnel only. Set the function Check the batteries for damage before installation.
Disconnect the battery connector and the battery charger plug. Handle the batteries with great care.
Install the battery terminal protection caps supplied with the machine.
The machine requires two 12 V batteries, connected according to the below diagram.
There are no batteries and charger on the machine from factory, but customers can purchase batteries ( WET or GEL), charger .
1.Buy appropriate batteries (see Technical Data paragraph).
2.For battery choice and installation, apply to qualified battery Retailers.
3.Set the machine and the battery charger (if equipped) according to the type of batteries installed (WET or GEL) as shown in the following paragraph.(in detail see remark)
BATTERY CHARGER SETTING
1.The charger default setting is common position for AGM,Gel,SLA,VRLA from factory
2.If need use WET position only for lead batteries please contact dealer
|
11
