Getting started

7

Insert SIM card/battery

The service provider supplies you with a SIM card on which all the im- portant data for your line is stored. If the SIM card has been delivered in credit card size, snap the smaller segment out and remove any rough edges.

Press grooved area n, then lift cover o.

o n

Press latch in the direction indicat- ed by the arrow p, lift battery at the cutout on side of the phone, then tilt upwards and remove q.

p

q

Insert SIM card in the opening (contacts pointing downwards) and push gently until it engages (make sure the angled corner is in the correct position r).

r

Insert battery into the phone side- ways s, then press downwards t, until it engages.

t

s

Replace cover and press down- wards until it engages.

Note

Always switch off phone before removing the battery!

Only 3-Volt SIM cards are supported. Please contact your service provider, if you have an older card.

Functions without SIM card

p. 80

Page 9
Image 9
Siemens M50 manual Getting started, Insert SIM card/battery