Siemens M50 Making a phone call

Making a phone call 13
M50 en, A31008-H5150-A1-1-7619 (1. März 2002, 17:25)
© Siemens AG 2001, L:\MOBIL\K45\M50-Manta-neues Design\ENG-
Making a
phone call Dialling with number
keys
The phone must be switched on
(standby mode).
JEnter the number (always
with prefix, if necessary
with the international di-
alling code).
§Clear§ A short press clears
the last digit, a long press
clears the entire number.
WPress the Call key. The
phone number displayed
is dialled.
End call
SPress the End key briefly.
Call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
Set volume
NYou can adjust the hand-
set volume with the scroll
key (only during the call).
If a Car Kit is used, its volume setting
does not affect the usual setting on
the phone.
Redial previous numbers
To redial the phone number last
called:
WPress the Call key twice.
To redial other numbers that were
dialled previously:
WPress the Call key once.
NPick out the required
phone number from the
list, then press...
W... to dial.
Note
? Store number............................p. 19
§Options§Call lists. ............................p. 17
§Hold§ ...............................................p. 15
; menu§Call menu ..........................p. 16
§Divert§Divert set ............................ ..p. 73
International dialling codes............... p. 75
Auto key lock.....................................p. 61
Phone number memo........................p. 76
Switch ringer on, off...........................p. 59
Microphone off..................................p. 16
Phone number transmission off/on
(Hide ID)............................................p. 67
Send DTMF tones............................. p. 73