Replacement remotes

Your system comes with two Responder remote controls (P/N 7153V).

If additional remotes are desired, please see your authorized dealer or visit www.directedstore.com to order.

System maintenance

The system requires no specific maintenance. Your One way remote is powered by small coin cell lightweight 3-volt lithium battery that will last approximately one year under normal use. The remote uses one CR2032 cell battery. When the battery begins to weaken, the operat- ing range will be reduced.

Low battery indicator

When the batteries are low the alarm then emits an additional chirp upon disarming of the alarm to let you know its time to change the remote battery.

Note: The Arm/Disarm chirps should be programmed ON for the alarm to emit any additional chirps during disarm. Ask your authorized dealer if you have any questions.

Battery Replacement

Slide the door up to expose the battery beneath the holder. Remove the expired battery. Place the new battery into the remote control. When power is returned the remote control is ready for use.

Two Car Operation

You can use the remote control system for two cars with full command capability for both vehicles.

© 2008 Directed Electronics. All rights reserved.

11

Page 11
Image 11
Viper G5102V manual Replacement remotes, System maintenance, Low battery indicator, Battery Replacement, Two Car Operation