Sensor Silent Mode
In this mode, a sensor cannot trigger the siren. All entry points (doors, hood, etc.) will still trigger the siren.
Press the 
button three times, and then press the 
button.
Note: The next time you arm the system, it will function normally.
➤Disarming the System
While the system is armed normally:
•Press the 
button once.
The siren in the vehicle will “chirp” twice, and the parking lights will flash.
If you hear four chirps on disarming, the system was triggered in your absence. Immediately look at the Status LED in the vehicle and count the number of flashes between pauses. This number is important, it tells what triggered your alarm. See Disarming section under Diagnostics on page 33 for more details.
If you hear five chirps on disarming, the system was repeatedly trig- gered in your absence. Immediately look at the Status LED in the vehicle and count the number of flashes between pauses. This number is impor- tant, it tells what triggered your alarm.
The door locks (if connected) will unlock, and the parking lights will flash.
While the alarm is triggering:
Press the 
button on the remote. The siren will stop sounding and disarm the alarm system.
© 2008 Directed Electronics. All rights reserved. | 21 |
