Using the remote start

Read this user guide, including the Warnings section at the beginning. Ensure that the vehicle is parked in the open air and not in a garage. To use your remote start to pre-warm or pre-cool your vehicle, remember to set the climate controls to the desired settings before shutting off the engine.

Remote starting your vehicle

Before using the remote start be sure the vehicle is parked in a safe area with proper ventilation.

To remote start the vehicle:

Press the button on the remote control. The vehicle parking

light flashes

The preset remote start run time is 12 minutes. This can be changed to between 12 and 60 minutes (see your authorized dealer for program- ming changes).

Points to remember

If the hood is open or is the brake pedal is pressed, the vehicle will not start using remote start. The remote starter shuts down:

When the brake pedal is pressed

The hood is opened

If the alarm is triggered when armed.

When the Remote Start command is sent again from a remote control.

© 2008 Directed Electronics. All rights reserved.

25

Page 25
Image 25
Viper G5102V manual Using the remote start, Remote starting your vehicle, Points to remember