ENGLISH | USER MANUAL |
|
|
|
|
1
MAINTENANCE
8] Select either low speed {150 rpm} or high speed {300 rpm} by pushing the motor mounted switch (1) into the low or high position.(Only for VE17DS) *Never change the speed while operating the machine. Be sure the
power is turned off prior to changing the speed.
9] When the machine is in operation, both hands should be placed on the switch housing {upper handle}.
10] During operation, to make the machine go right, gently raise the handle. To make the machine go left, gently lower the handle.
11] To stop the machine at any time, simply release the operating trigger and the machine will stop automatically.
12] Unplug machine as soon as you are not using it.
13] Tilt machine back and remove pad driver or brush.
14] Roll the power cord around the handle and the power cord hook.
To keep the machine performing well for many years, please follow the following maintenance procedures.
*Always confirm that the machine is unplugged prior to performing any maintenance or repairs. *Never store a low speed machine with the pad driver or brush mounted to the machine.
1] Clean the outside of the machine with a mild cleaner.
2] Check power cord for any damage. If damage is detected, replace power cord immediately.
3] Lubricate wheels with a water resistant lubricant once a month.
4] Check machine for loose or missing nuts and bolts, and replace as necessary.
5] If the machine is used in a dusty environment, you may remove the motor cover and blow the motor, clean with compressed air. This will ensure proper ventilation, and allow the motor to run cooler.
STORAGE
1] Unplug machine from power source.
2] Store in upright position in a dry area.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
10
VF72309 |
