USER MANUAL
ENGLISH
–The humidity must be between 30% and 95%.
–Do not use the machine as a means of transport.
–Do not use the machine on slopes with a gradient exceeding the specifications.
–Do not allow the brush/pad to operate while the machine is stationary to avoid damaging the floor.
–In case of fire, use a powder fire extinguisher, not a water one.
–Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
–Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the openings free from dust, hairs and any other foreign material which could reduce the air flow.
–Do not remove or modify the plates affixed to the machine.
–If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is less than 2.5 m/s2
–This machine cannot be used on roads or public streets.
–Pay attention during machine transportation when temperature is below freezing point. The water in the recovery tank or in the hoses could freeze and seriously damage the machine.
–Use brushes and pads supplied with the machine and those specified in the User Manual. Using other brushes or pads could reduce safety.
–In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary, request assistance from the authorized personnel or from an authorized VIPER Service Center.
–If the machine
•does not work properly
•is damaged
•has water or foam leaks
•has been left outdoors exposed to bad weather conditions
•is wet or has been dropped into water
–turn it off immediately and contact VIPER Service Center or a qualified technician.
–If parts must be replaced, require ORIGINAL spare parts from an authorized VIPER Dealer or Retailer.
–To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this manual must be performed by the authorized personnel or by an authorized VIPER Service Center.
–Carefully read all the instructions before performing any maintenance/repair procedure.
–Do not wash the machine with direct or pressurized water jets, or with corrosive substances.
–The machine must be disposed of properly, because of the presence of
–Caution: This appliance is not suitable for picking up hazardous dust.
–Caution: This appliance is for dry use only and is not to be used or stored outdoors in wet conditions
–WARNING: Only use the brushes provided with the appliance or those specified in the instructiton manual. The use of other brushes may impair safety.
–The plug is to be removed from the
–Do not allow the rotating brushes to come into contact with the supply Cord.
–The
–This appliance is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and rental businesses.
VF72309 |
|
5