USER MANUAL
ENGLISH
BEFORE STARTING THE MACHINE
ASSEMBLY
For transport reasons the motor head and shaft are supplied not assembled.
1 | 1] Insert the gear index housing (1) into the “U” shape bracket (2). |
|
|
2
2] Align the holes of the gear index housing and the “U” shape bracket.
3]Insert the socket screws into the holes of the “U” shape bracket and then tighten the screws.
4] Wind the power cord around the handle and the power cord hook.
TRANSPORT
1
1] Place the handle in the upright position, Grasp the handle with both hands and tip the cleaner until it stands on the two wheels (1).
2] Wheel the cleaner to where it is needed.
OPERATION OF THE MACHINE
BASIC OPERATION
1] Remove any obstructions or other obstacles in the area which is to be cleaned.
2] Place the handle in the upright position and tilt machine back until handle rests on the floor.
*Be sure the machine is not plugged into an outlet.
3] Attach the pad driver or brush to the machine by placing the clutch plate over the gearbox hub and turning the driver / brush 1/4 turn.
4] Place machine back into its upright position.
5] Plug power cord into a grounded outlet.
*Never use an extension cord in conjunction with the standard power cord.
36] The handle height may be adjusted by pulling the adjustment lever (1) and
|
|
| lower the shaft (2) into its cleaning position. | |
|
|
| 7] To start the machine, press the red safety button(3) on the top of the upper | |
|
|
| switch housing ,and then squeeze either of the operating triggers(4/5) the | |
4 |
|
| ||
| 5 | |||
|
| safety button (3) must be depressed prior to squeezing the operating | ||
1 | ||||
|
|
| ||
|
|
|
| triggers (4/5). | |
2 | ||
| ||
|
|
VF72309 |
9