S T E P 4 GREEN BAG
• Grab the seat back support (AT1) and align the holes at the end of the tube with the open holes in the sliding seat bottom assembly (AH1). Connect with arrow up using one bolt (M10x140), two flat washers (10.2x22x2), and a nylon nut (M10). Lay the seat back support so that it rests on seat back support post (AT3).
• On each side of the seat back support (AT1), attach the seat back connecting braces (HO9) using one bolt (M12x152), two flat washers (13x26x2.5), and one nylon nut (M12). Attach the other side of the connecting braces to the main floor support (AC1) directly underneath the seat back support post. Secure with one bolt (M12x152), two flat washers (13x26x2.5), and one nylon nut (M12).
Connect with
arrow up
14
