S T E P 6 Y E L L O W B A G
•Attach the swing arm (AF1) to swing arm support (AC3) by guiding the small axle (FO8) through the bracket on the swing arm support. Once through the wall of the bracket, slide a wavy washer (20.7x29.1x0.3) over the axle, before sliding the axle through the swing arm (AF1). After exiting the opposite wall of the bracket (make sure to line the flat surface of the axle up with the flat on the bracket) attach a bushing (F10), flat washer (13x26x2.5), lock washer (12.2x21.5x3), and bolt (M12x25). Tighten hardware.
•Place the press arm (AD1) over the swing arm (AF1) and fasten by sliding a shaft (DO1) through (match up flat surfaces) and attach with a bushing (DO7), flat washer (13x26x2.5), lock washer (12.2x21.5x3), and bolt (M12x25). Tighten hardware.
16
