VisionTek Theater 550 PRO manual Installing Hardware, Quick Installation

CHAPTER 2: Installing Hardware

This chapter will guide you through the physical installation of your THEATER™ 550 PRO-based TV tuner card.

Quick Installation

Experienced users and system administrators can follow these brief instructions for installing the THEATER™ 550 PRO-based TV tuner card in the shortest possible time.

To perform a quick installation

1Uninstall the drivers and software for any previous TV Tuner products if you have not already done so.

2Shut down and disconnect the power from your computer system.

3Remove any previously installed TV Tuner product.

4Install your new THEATER™ 550 PRO TV tuner card.

5Reassemble and connect your computer system.

6Install the THEATER™ 550 PRO-based TV tuner card drivers and configuration software from the VisionTek Installation CD-ROM by doing one of the following:

•Run through the automatic SETUP utility; or

•Start > Run > X:\SETUP.EXE (where X is the drive letter of your CD-ROM drive).

7Windows XP Media Center Edition version card – run setup wizard by pressing green button on remote control. or

7Windows XP Snapstream “Subscriber Edition” version card – install SnapStream software.

6