HT-H4550R
(L) (R) | (L) (R) |
SPEAKER CABLE | SCREW (5x15): 16EA |
FRONT / SURROUND | STAND | STAND BASE | CENTRE |
|
|
| SUBWOOFER |
Installing the Speakers on the Tallboy Stand
* HT-H4550R only - Front/Surround Speakers
1 Stand Base | 2 |
1. Turn the Stand Base
2. Use the driver to combine the screws on the 3 marked holes.
Stand
03 Connections
3.Straighten a supplied speaker wire to the gravity direction and put in the hole on the centre of Stand Base.
4.Connect the upper Speaker to the assembled Stand.
5.Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver.
And then connect a speaker cable.
6.This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Connecting The Speakers
3
5
4
Speaker 
Stand 
6
1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.
2.To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and | Black |
|
|
| Red |
then release the tab. |
|
|
| ||
|
|
|
|
| |
b. Press down the black tab on the back of the speaker, insert the black wire, |
|
|
|
|
|
|
|
|
|
| |
and then release the tab. |
|
|
|
|
|
|
|
|
|
|
3.Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.
English 13
