Vista VISTA-20HWSE, VISTA-20SE – 25 –, General, devices, Information, To deactivate, ENTER SECURITY CODE THEN PRESS # + 8 + DEVICE NUMBER

USING DEVICE COMMANDS

General Your system may be set up so that certain lights or other devices can be turned on or Information off by using the device command from the keypad. Ask your installer if this has been done in your system. If programmed for your system, some devices may activate automatically upon certain system conditions. In this case, the following commands can be used to override the device activation. See your installer for a full explanation of

this feature.

To activate devices ENTER SECURITY CODE THEN PRESS # + 7 + DEVICE NUMBER

		+	#	+ 7 +
	(Security Code)			(Device Number)
	Example: 7	2	9	6 then press #, then press 7, then enter the number representing the
	device you wish to activate. See your installer for device numbers assigned for your system.
To deactivate	ENTER SECURITY CODE THEN PRESS # + 8 + DEVICE NUMBER
devices				+ 8 +
		+	#
	(Security Code)			(Device Number)
	Example: 7	2	9	6 then press #, then press 8, then enter the number representing the
	device you wish to deactivate. See your installer for device numbers assigned for your system.
	Device		Description		Device	Description
	1				5
	2				6
	3				7
	4				8
				– 25 –