5
Step 1: Open the battery door by lifting the tab on the
door.
Step 2: Insert two AA batteries with the polarity as
Shown.
Step 3: Close the battery cover.
Warning: Do not open the battery door when the ca mera is powered ON. This will
cause all images in memory to be lost immediately. If you open the battery door when
the camera is OFF (when chan ging the batteries) you must close the door within thirty
(30) seconds or your imag es will be erased from memory.
Notes:
1. Always download your images to your computer soon after you have captured them.
Never assume your images will be retained for more than three or fo ur days. If the
batteries are deplete d, your images will be lost.
2. If you must change the batteries, makes sure the camera is OFF and then changes the
batteries in less than thirty (30) seconds.
3. If you will not use the camer a for a long time (several days, or more ) remove the
batteries. The batteries will discharge slowly if left in the camera. This may cause
complete battery discharge as well as loss of images. The batteries ma y corrode if
left in the camera for exten ded periods of time.
4. Dispose of batterie s properly in accordance with local laws and regulations. Do not
place them in fire.
5. The camera has an au tomatic power-saving feature. The camera will turn off
automatically if it has not be en used after approximately sixty (60) seconds .
6. When the camera is connected to a computer using a USB cable, it is not necessary to
use batteries because the camera uses the power provided by the computer through
the USB interface.