CONTROL PANEL
On/Off Switch (l)/(O): The switch is located on the front left side of the machine below the control
panel and below the On/Off light. The On/Off switch controls the power to the machine. While plugged in, switch to On to ready the machine for blending. Shut off the power switch at night or whenever the machine will be left unattended.
On/Off Light:The light is located on the front left side of the machine below the control panel and above the On/Off switch. (See illustration above.) When lit, the machine is plugged in and the On/Off switch is powered On. The power light will flash when a
Start/Stop Switch l /: Push down the Start/Stop switch to activate a programmed setting or the Variable option. Push again to stop.
Variable Speed/Programming Dial: The center Variable dial serves two functions. When rotated left of center, the dial is used to select one of three programs that are activated by pushing down the Start/Stop switch. (Programs will automatically stop after a preset time.) When rotated right of center, the dial is used to select the Variable speed of the blade. The machine is activated and stopped by pushing down the Start/Stop switch.
Pulse Switch: The pulse switch can be used to quickly refresh product in the container or to temporarily activate the machine. In Variable settings (right of center), the pulse switch will activate at the speed setting of the dial for the duration that the switch is held down. When the Variable dial is set on a program (settings left of center), the pulse switch will activate at 50% of High speed for the duration the switch is held down.
IMPORTANT NOTES
Start/Stop Switch: If necessary, you may stop a program
10