SWIM PROGRAMMING INSTRUCTIONS

REFER TO PROGRAMMING INSTRUCTIONS ON PAGE 22 FOR QUICK PROGRAMMING STEPS

A. PROGRAMMING MENU .....................................................

Note: All programming functions are shown sequentially. To access any specific programming step, you have to enter programming as explained here.

Press and hold for three (3) seconds until “dISC” is on the screen to enter the programming menu.

To exit programming mode at any point in the sequence, press any button

other than , or , or wait for 10 seconds (without pressing any button).

B. HEAT DAYS & TEMPERATURE ............................................

Your spa is pre-programmed from factory to heat “All” days, “hd=A”. It has however the ability to be programmed for different temperatures on different days of the week. To do so, follow these steps:

Example: Let's assume that you don’t normally use the spa between Mondays and Thursdays and you want to save on your electric bill by reducing the spa’s energy consumption.

1.

While the display shows “hd=A”, press

. The

a.

hd=7

Saturday

b.

hd=6

Friday

 

 

 

 

 

 

display will show the heat day. Press

again until

c.

hd=5

Thursday

 

d.

hd=4

Wednesday

 

the desired heat day is selected

 

e.

hd=3

Tuesday

 

 

 

 

 

2.

Press

to display temperature for the day

f.

hd=2

Monday

g.

hd=1

Sunday

 

 

 

 

 

 

selected. Press and hold

to lower temperature

 

 

 

 

 

 

 

to, for instance, to 80ºF (27ºC). Press to increase the temperature.

3.To check or adjust the temperature on another day, press to cycle through the program until the display shows “hd=A” again. Then repeat steps 1 through 3 to do the same for Wednesday (hd=4), Tuesday (hd=3) and Monday (hd=2).

NOTE: If you programmed different temperatures at different days, DO NOT alter the temperature setting after the display shows “hd=A”. If you do so, “All” days will revert to the newly set temperature.

C. TEMPERATURE – ºF or ºC..................................................

Your spa is pre-programmed from factory to display temperature in degrees Fahrenheit (ºF). Use the arrow keys to change between degrees Celcius (ºC) and degrees Fahrenheit (ºF).

D. FILTRATION (CIRCULATION) CYCLE ................................

Your spa is pre-programmed from factory to run the filtration cycle for 12 hours a day. You may change this setting to 6 hours or 24 hours a day. It is recommended that filtration hours be set to the minimum necessary to maintain water quality.

Notes: During filtration, the water temperature may slightly rise, therefore to prevent overheating during the warmer months of the year, do not program filtration for more than 4 hours a day.

Keeping your set temperature a few degrees below your desired temperature will aid in controlling water temperature.

3s

*

TO CHANGE TO

INDIVIDUAL DAYS

OF THE WEEK:

7 – Saturday

6 – Friday

5 – Thursday

4 – Wednesday

3 – Tuesday

2 – Monday

1 – Sunday

USE ARROWS TO

CHANGE TEMPERATURE

USE ARROWS TO

CHANGE ºF to ºC

USE ARROWS

TO CHANGE

continues on next page

*If the display shows AH or ECO

instead of hd=A, the swim controller is programmed incorrectly. Call a service technician for instruction on reprogramming.

PAGE 13

Page 19
Image 19
Vita Spa xStreamPro, xStreamDuoPro owner manual Swim Programming Instructions, Filtration Circulation Cycle

xStream, xStreamPro, xStreamDuoPro specifications

Vita Spa has long been a leader in the spa industry, and its innovative lineup features the xStreamDuoPro, xStreamPro, and xStream models, which stand out for their advanced technologies, exceptional performance, and luxurious designs. Each of these spas offers unique characteristics and features tailored to provide users with an unparalleled relaxation experience.

The xStreamDuoPro is designed for those seeking the ultimate in hydrotherapy. It features a dual zone system that allows users to independently control the temperature and jet settings for each side of the spa. This means that couples or friends can enjoy different experiences simultaneously, catering to individual preferences. The xStreamDuoPro also incorporates powerful jet technology, providing a range of massage options from gentle soothing to deep tissue relief, allowing users to customize their hydrotherapy sessions. The spacious design accommodates multiple users comfortably, making it perfect for social gatherings or family time.

Similarly, the xStreamPro offers a more compact yet feature-rich alternative. This model retains many of the advanced technologies found in its larger counterpart, including high-performance jets equipped with variable speed settings, enhancing the massage experience. The xStreamPro is perfect for smaller spaces without compromising on performance and comfort. It also includes an energy-efficient heating system, which ensures that the spa maintains the desired temperature while reducing energy costs.

The xStream model is the entry-level option, but it still boasts impressive features. With an easy-to-use control panel and energy-efficient operating protocols, the xStream offers simplicity without sacrificing quality. Its design focuses on optimizing user experience with an intuitive layout and comfortable seating. The xStream utilizes high-quality materials that are both durable and aesthetically pleasing, allowing it to seamlessly blend into any backyard or patio setting.

All three models employ cutting-edge filtration systems that ensure clean, clear water while minimizing maintenance. Vita Spa also emphasizes energy efficiency across its product range, utilizing advanced insulation and energy-saving technologies to keep operational costs low.

In conclusion, the Vita Spa xStreamDuoPro, xStreamPro, and xStream models encapsulate the best features of modern spa technology, catering to various user needs while providing luxurious comfort. Whether you opt for the extensive capabilities of the DuoPro, the compact efficiency of the xStreamPro, or the straightforward luxury of the xStream, you are guaranteed a rejuvenating retreat at home.