Vivid Audio 25 manual Connect your camera to the computer

1.Insert the installation CD into your CD-ROM drive. The Vivitar Experience Image Manager will begin to install both the camera driver and Image Manager Software at the same time

2.Please review the license terms.

On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue.

3.On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program will be installed, and then click “Install”.

4.Please wait while the application continues the installation process on your computer. Follow all instructions.

5.On PC: Click the “Close” button when the installation is complete.

6.The application automatically opens.

7.On Macintosh: Click the “Quit” button when the installation is complete.

8.If you closed the application, click on the Vivitar Experience Image Manager desktop icon or run and open the application from the Start\Programs menu on your computer.

Connect your camera to the computer

1.Use the USB cable that came with your camera to connect your camera to your computer.

2.Plug the one end of the USB cable into the USB slot on the side of the camera and plug the other end into an available USB port on your computer.

3.Your camera will automatically turn on.

17