Send command to device attached to
This hyperlink will inform NetworKam to send out binary format commands to the COM with “0x12, 0x34, 0x56” followed by “0xAB, 0xCD, 0xEF”. Each comma separates the commands by 200 milliseconds. “flush=yes” means the receive data buffer of COM port must be cleared before read. Then read 6 bytes after waiting for 1000 milliseconds. The read data can be up to 128 bytes and will return as ASCII coded hexadecimal value, e.g., 0x41, 0x42, 0x43 read from COM port will show in returned homepage as 414243 instead of ABC.
Restore factory default settings
/setup/restore.cgi
NetworKam will automatically restart after restoring factory default configurations.
Restart system
/setup/reset.cgi
Restart NetworKam without warning.
75
www.vivotek.com
T: 886-2-22404099
F:
