VIVOTEK

To start a module, select the checkcircle in front, and click the Start button.

If you should need to remove a module, select the checkcircle in front and then click the Stop button. By then the module status will become OFF, and the X button will appear at the end of the row. Click on the X button to remove an existing module.

When prompted by a confirm message, Click Yes to proceed.

Yes No

Note that the actual memory consumed while operating the module will be indicated on the

Memory status field. This helps determine whether a running module has consumed too

much of system resources.

User's Manual - 109

Page 109
Image 109
Vivotek IP8337H-C user manual Yes No