Vivotek SF8174 user manual Virtual input capability.nvi

VIVOTEK

8.23 Virtual input (capability.nvi > 0)

Note: Change virtual input (manual trigger) status.

Method: GET

Syntax:

http://<servername>/cgi-bin/admin/setvi.cgi?vi0=<value>[&vi1=<value>][&vi2=<value>] [&return=<return page>]

PARAMETER		VALUE	DESCRIPTION
vi<num>		state[(duration)nstate]	Ex: vi0=1
			Setting virtual input 0 to trigger state
		Where "state" is 0, 1. “0”
		means inactive or normal
			Ex: vi0=0(200)1
		state while “1” means	Setting virtual input 0 to normal state, waiting 200
		active or triggered state.	milliseconds, setting it to trigger state.
		Where "nstate" is next	Note that when the virtual input is waiting for next state, it
		state after duration.	cannot accept new requests.
return		<return page>	Redirect to the page <return page> after the request is
			completely assigned. The <return page> can be a full URL
			path or relative path according the current path. If you omit
			this parameter, it will redirect to an empty page.
Return Code	Description
200	The request is successfully executed.

400The request cannot be assigned, ex. incorrect parameters. Examples: setvi.cgi?vi0=0(10000)1(15000)0(20000)1

No multiple duration. setvi.cgi?vi3=0

VI index is out of range. setvi.cgi?vi=1

No VI index is specified.

503The resource is unavailable, ex. Virtual input is waiting for next state. Examples:

setvi.cgi?vi0=0(15000)1 setvi.cgi?vi0=1

Request 2 will not be accepted during the execution time(15 seconds).

232 - User's Manual