Vivotek VS8102 manual Preset Positions, Functions are the same as the Control Panel on the home

VIVOTEK

Preset Positions

If you select DynaDome/SmartDOME, Lilin PIH-7x00, Pelco D, Pelco P, or Samsung scc643 protocol as the PTZ driver and click the Save button, the Preset Position button will be enabled. Click Preset Position to open the settings page. You can also select preset positions for the camera to patrol. A total of 20 preset positions can be configured.

Please follow the steps below to preset a position:

1.Adjust the shooting area to the desired position using the buttons on the right side of the window.

2.Enter a name for the preset position, which allows for up to forty characters. Click Add to enable the settings. The preset positions will be displayed under the Preset Location list on the left-hand side.

3.To add additional preset positions, please repeat steps 1~2.

4.To remove a preset position from the list, select it from the drop-down list and click Delete.

5.The preset positions will also displayed on the main page. Please refer to the illustration on the next page.

6.Click Save to enable the settings.

2

1Functions are the same as the Control Panel on the home page

2

4

6

User's Manual - 63