Vizio E321MV user manual Changing the Signal Source, Scanning for Channels

E321MV

Changing the Signal Source

Using this option, you can change the signal source for the coaxial (TV) input.

To change the signal source:

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed.

3.Use the Arrow buttons to highlight Channels and press OK.

4.Use the Arrow buttons to highlight Signal Source and press OK. The Signal Source menu is displayed.

5.Use the Arrow buttons to change the setting to Cable or Antenna.

6.Press EXIT.

5

Scanning for Channels

Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different free-to-air broadcast television channels are available.

To scan for channels:

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed.

3.Use the Arrow buttons to highlight Channels and press OK.

4.Use the Arrow buttons to highlight Auto Channel Scan and press OK.

5.Use the Number Pad to enter your parental control passcode.

The channel scan begins.

6.Wait for the channel scan to reach 100%, then press EXIT.

If you want to cancel the channel scan before it is completed, highlight Cancel and press OK.

13