Vizio E420-B1 user manual Setting Up the Tuner, Channel Scan

Setting Up the Tuner

You can use the TV’s Tuner menu to:

•Select a Tuner Input

•Perform an Auto Channel Scan

•Perform a Partial Channel Scan

•Manually Add Channels

•Select Channels to Skip

•Select Analog MTS Modes

•Select Digital Languages

VIZIO

Tuner

Tuner Mode	Antenna
Auto Channel Scan
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio	Stereo
Digital Language	English

5

Selecting a Tuner Input

Select the type of tuner input you will be using.You can select either Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.

1.From the Tuner menu, highlight Tuner Mode and press OK. The Tuner Mode menu displays.

2.Highlight Antenna or Cable and press OK. Press EXIT.

Scanning for Channels

Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different free-to-air broadcast television channels are available.

To perform an Auto Channel Scan:

1.From the Tuner menu, highlight Auto Channel Scan, and press OK. The channel scan begins.

2.Wait until the channel scan is 100% complete. Highlight Done and press OK.

3.Press the EXIT button on the remote.

If the channel scan is cancelled,the channels that were already discovered are retained. A new channel scan will clear all channels.

VIZIO

CHANNEL SCAN

Channels Found

Digital Channels: 0

Analog Channels: 0

13% Complete

Cancel

Cancel the channel scan.

28