Vizio JV50P 2.9.2 Using Optical Audio

VIZIO JV50P HDTV10A User Manual
Version 5/21/2007 29
www.VIZIO.com
2.9.2 Using Optical Audio
1. Turn off the power to the Plasma HDTV and Receiver/Amp.
2. Using an optical audio cable (SPDIF connector), connect the cable to the audio input
connector on the Receiver/Amp and connect the other end to the OPTICAL Audio Out (white
area) audio connector at the rear of the Plasma TV.
3. Turn on the power to the Plasma
HDTV and Receiver/Amp.
4. Then press the menu button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the button on the remote
control to select the Audio menu.
6. Press the button on the remote to
select Speakers.
7. Press the button on the remote to
select Off so that the sound from the
Plasma HDTV will now be routed
through your Receiver/Amp system.
Note:
Refer to your Receiver/Amp user manual to select the corresponding audio input.